skippys pond construction
EPDM 45mil rubber
10 and 20 foot wide x 30' + long
frame in your pond with 2"x6" boards stood on end about 12 inches back from the lip and secured into the ground with 1/2 inch conduit pipes driven into the ground behind the boards, this makes a nice barrier where you can bring the liner up and over the boards where it can be secured by screwing a few slats of wood to the outside of the boards wedging the liner in-between. Also, a couple of other benefits of this design is that you create a under water shelf where you can put bog plants etc. and since the water when full, is actually higher than the surrounding ground by 4 to 6 inches it softens the sides of your pond and looks more natural.
1/4" layer of wet newspapers, it will stick to the side walls and will not blow around
pond gallons by taking the length X width X average depth X 7.5. You noticed we said estimate and the reason is the average depth measurement.
GPH... Gallons Per Hour = pump water from one place to another, usually this is uphill. The head height is where the water ends up. The height the pump has to pump the water.
xxx
No comments:
Post a Comment